98
6.
Use the arrow buttons on the projector or the remote control to select the corner of the image you
want to adjust. Then press
Enter
.
7.
Press the arrow buttons to adjust the image shape as necessary. Press
Enter
to return to the area
selection screen.
8.
When you are finished, press
Esc
.
Parent topic:
Related references
Projector Feature Settings - Settings Menu
Correcting Image Shape with Arc Correction
You can use the projector's Arc Correction setting to adjust the curve or arc of the sides of your image.
Note:
Adjusting the Arc Correction setting may affect interactive pen and finger touch calibration.
1.
Turn on the projector and display an image.
Note:
You can display a pattern to aid in adjusting the projected image using the Settings menu.
2.
Press the
Menu
button.
3.
Select the
Settings
menu and press
Enter
.
Summary of Contents for 696Ui
