ESON 696Ui, User Manual

Page: 157 / 343

157
Related concepts
Using BrightLink with a Computer
Using BrightLink Without a Computer
Using the Projected Screen as a Whiteboard (Built-in Whiteboard Mode)
You can use the interactive pens or your finger to write or draw on the projection surface just as you
would on a chalkboard or dry erase board. You can use one pen, both pens at the same time, or a
combination of pens and finger touch.
1. Hover near or tap the board or projected image with the interactive pen or your finger. Tap the
whiteboard icon on the toolbar.
You see the whiteboard screen, with the main toolbar on the side and the projection control toolbar
on the bottom of the screen:
2. To move the main toolbar to the other side of the screen, tap the arrow on the opposite side of
the screen.
Note: You can use the pen or your finger to move the arrow icon up or down to reposition the
toolbar.