PSM 10/12/15 Series Installation manual
Esoltech AB, the battery company
May 1, 2019
29
6.
FINAL CHECK AND FINISHING UP
Check and make sure all the cable connection is done properly. Consider the following
checklist before proceeding:
•
Cables on the front side of battery modules
•
Cables on the back side of the ESO (no empty socket)
•
Cables on the front side of controller module
•
Protection covers on both the battery and controller modules
6.1 Jumper bricks
Both the battery and the controller module come with jumper bricks for safety consideration.
The battery is physically cut off from the internal circuit if the jumper brick is removed. Install
the batter jumper brick according to the following diagram.
Make sure all the screws are properly fastened.
Jumper Brick inst allat ion
