20
6.7.2
Menu Lock (LOCK)
If you have not set a password before, you will see NPASS in the display when you enter this
menu. Press the PRG key to set the desired password here. Then use the DOWN and UP keys
to select ON the menus you want to lock. The description of menus is the same as in 6.7.1
Menu Hiding section.
6.7.3
Password Determination (PASS)
Use this menu item to set a password or to change the password you have previously set. If
no password was previously set; When you enter this menu, the display will show NPASS.
Press the PRG key to set the desired password here. If the password has already been set;
The display shows PASS? Will appear and you will be asked to enter this password. After
inputting the password, the display will show NPASS. You can specify your new password
here and confirm it with the PRG key.
6.7.4
Return to Factory Settings (FTRY)
You can return the EPA 100 to its factory settings at any time. Press PRG key to come to this
menu to return to the factory settings. Here you are going to face the PASS? You need to
enter 12345, which is the factory password, not the user password you specified on the
password screen.
6.7.5
Restart the Device (RESET)
In any case, press the PRG key to come back to this menu to restart your device. The device
will automatically power off and on and start working.
