Eskon EPA 100, User Manual

Page: 17 / 25

17
6.4 TRANSITION TO PROGRAMMING MODE
6.4.1 Selection of Relay Function
This function selection determines when the relay output will switch on and switch off
according to the set values.
 .
When the value read in the device reaches or exceeds
Set-1, the relay switches off.
When the value read in the device is between Set-1A and
Set-1B value, relay switches off
The value read on the device remains set to the value of
Set-1 by increasing or decreasing the value of the relay
each time it switches off.
The value read in the device remains set to the value set by the
set-1A or set-1B value each time the relay is switched off.
The relay remains switch off until the value entered when
the value read in the device passes the Set-1 value or the
value of Set-1 at every level such as 2,3,4,5
The relay does not switch off in any way.
(Press and hold)






1
2
3


.


.



.

4
5
6


.




.