INSTALLATION AND USE
PLMAC
KEYBOARD PLATFORM
PLMAC Rev A 4/17
Model PLMAC
Page 1: ...INSTALLATION AND USE PLMAC KEYBOARD PLATFORM PLMAC Rev A 4 17 Model PLMAC ...
Page 2: ...nge Nut 4 Cord Clips 2 Panhead Screw 4 8 32x1 2 8x32 8 32x5 8 CAUTION Hand tighten screws only Do not use power tools TOOLS REQUIRED Phillips screwdriver STEP 1 Attach Palm Rest Attach the palm rests to the keyboard platform Use the 8 32x5 8 panhead screws and a Phillips screwdriver Attach each palm rest with two screws as shown NOTE The keyboard platform can be switched from right side mouse to l...
Page 3: ...PORTANT The flange nuts must be fully tightened to ensure the nuts are locked Use a Phillips screwdriver STEP 3 Manage Cables Adhere cord clips to the underside of the keyboard platform as needed to organize the keyboard and mouse cables TO OPERATE THE KEYBOARD ARM follow the instructions on the keyboard arm or the instructions included with the installation procedures for the product Cord Clip Fl...
Page 4: ...800 833 3746 esiergo com 2017 ESI Ergonomic Solutions All rights reserved PLMAC Rev A 4 17 ...
