background image

 
 

 
 

 

 

 

All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of 
ESERA GmbH. Errors and technical modification subject to change. 



ESERA GmbH, ESERA-Automation 2020 

www.esera.de 

11119 V2.0 R1.0  Manual 

Page 1 of 4 

Art. No. 11119 
 
 

 
 

User Guide 

1-Wire Temperature Sensor 

Pressure-resistant 1/8 inch screw-in sensor 

SEMOFLEX cable and RJ12 connector  

 
 

 

 

 

Product description 

The pressure-resistant temperature sensor with PUR connecting cable and 1/8" stainless steel sensor tube is 
pressure-tight, chemically resistant and may be immersed in liquids that do not attack stainless steel (1.4571) in 
the area of the sensor tube. The temperature sensor is ideally suited for high-quality applications in industry, 
heating and measuring technology. 
Individual 1-Wire sensors can be operated via adapter cable on a 

1-Wire Adapter

 or 1-Wire bus coupler. For a 

larger number we recommend using our 1-Wire Hub III and IV. 
 

Sensor: 

The sensor module can be integrated into a 1-Wire network via RJ12 plug connection. No calibration of the 
temperature sensors is necessary. Each temperature sensor has an individual serial number. 

 
Connection cable: 

High-quality, shielded connection cable for industrial applications, available in three-pole design. Cable with 
conductor cross-section 0.14 mm2, high-quality insulation made of extremely temperature and chemical resistant 
TPE (neoprene). Colour coding of the cores according to DIN 47100, RoHS compliant.  
The cable was specially developed for our temperature sensors to cover a wide temperature range with maximum 
resistance to environmental influences. 
 

Performance features 

 

Temperature Sensor with screw-in thread 1/8 inch 

 

High quality, Semoflex connection cable 2m 

 

Wide temperature range from -40 to 125°C 

 

Largely chemically resistant 

 

Waterproof grouted 

 

Resistant to alkalis and acids  

(low concentrations) 

 

Thermally formable for spiral  

 

Typical areas of application 

 

Industrial applications 

 

Compressed air and hydraulic technology 

 

Temperature sensor for heating systems 

 

laboratory equipment, scientific equipment 

 

 

 

 

Summary of Contents for DS18S20

Page 1: ...r 1 Wire Hub III and IV Sensor The sensor module can be integrated into a 1 Wire network via RJ12 plug connection No calibration of the temperature sensors is necessary Each temperature sensor has an individual serial number Connection cable High quality shielded connection cable for industrial applications available in three pole design Cable with conductor cross section 0 14 mm2 high quality ins...

Page 2: ...be found on the ESERA website ESERA Config Tool 3 or in the download area for this article in the ESERA Webshop 4 Pin assignment The Western connector is assigned as follows view of the cable i e the contact surfaces of the connector Note the sensor cannot be connected directly to the 1 Wire adapter because of different pin assignments Note Basic information and tips on the 1 Wire Bus system can b...

Page 3: ... exceeded or undercut otherwise the component may be damaged 8 Disposal information Do not dispose of the device in household waste Electronic devices must be disposed of in accordance with the Directive on Waste Electrical and Electronic Equipment on local Dispose of at collection points for old electronic equipment 9 Safety instructions When using products that come into contact with electrical ...

Page 4: ...ary contractual obligations consequential damages damages resulting from unauthorized usage and other legal grounds are excluded Excepting to this ESERA GmbH accepts liability for the absence of a guaranteed quality resulting from intent or gross negligence Claims made under the Product Liability Act are not affected If defects occur for which the ESERA GmbH is responsible and in the case of repla...

Reviews: