ESENE ES380, User Manual

Page: 14 / 69

www.escene.cn/en
ESCENE Communication Limited.
① W hen the AP
-3 is set up wireless parameters by the administrator, you can long press
"ok" to enter the password to connect it.
② If you don’t use EW FC rapid deployment, y
ou can According to the normal method for
manual connection and settings as following:
Feature Operating Steps
Wi-Fi Press OK or MENU > System Settings > Advanced Settings >
Password (Default is Empty)> Network > Wi-Fi Setting

Press Wi-Fi Setting to login in to the menu

Select " Wi-Fi ", and choose “ enable ”

Press " Save " key

Select “ Hotspot List ”

Press " Enter " key

Select the hotspot which you want to connect

Enter “ Password ”

Press " OK " key to make it work
DHCP Setting
Feature Operating Steps
DHCP Press OK or MENU > System Settings > Advanced Settings >
Password (Default is Empty)> Network > IP Setting

Press IP Setting to login in to the menu

Select " DHCP " mode

Press " Enter " key

Set the DNS\web port\telnet port

Press " Save " key to make it work

Tips " Network is changed, press OK reboot "
Static IP Setting
Feature Operating Steps
Static IP Press OK or MENU > System Settings > Advanced Settings >
Password (Default is Empty)> Network > IP Setting

Press IP Setting to login in to the menu

Select " Static " mode

Press " Enter " key

Set the IP\Mask\GW\DNS\web port\telnet port

Press " Save " key to make it work

Tips " Network is changed, press OK reboot "
3.4 SIP Account Settings
ES380 IP phone makes calls based on sip accounts, It can support Single account or