eSecure ES00M140 Page 45 User Manual Download

Page: 45 / 45

xp system.

23.

I cannot remember the advanced code or network code in the local menu operation.

Please contact the local service or call the HQ service. We will offer the service according the

machine type and the program edition.

4.2 Maintenance

Please brush printed circuit boards, connectors, fans, machine box and so on regularly.

Please keep the grounding well done to prevent the video or audio signal interfered and the

DVR from static or inductive electricity.

Do not pull out the video signal line or RS-232 port or RS-485 port with the power on.

Do not use the TV in the local video output port(VOUT) of DVR. It will damage the video

output circuit easily.

Please keep the DVR away from heat resource.

Please keep the DVR ventilated for better heat radiator.

Please check the system and maintain regularly.

Summary of Contents for ES00M140














































Search results

Summary of Contents for ES00M140

Reviews:

Related manuals for ES00M140

Brands by name

Popular brands

eSecure ES00M140, User Manual

Search results

Summary of Contents for ES00M140

Reviews:

Related manuals for ES00M140

Brands by name

Popular brands