Technical Data
ECS-CPCIs/FPGA
Hardware Manual Doc.-Nr.: E.1108.21/ 1.0
Page 19 of 28
4 Technical Data
4.1.1 General Technical Data
Power supply
voltage
Nominal voltage:
12 VDC ± 5%,
derived from CompactPCI Serial P1 connector
Power
consumption
P
MAX
= 3.3 W
Connectors
IN
OUT
P1
P3
(8 pin RJ45, X800, with integrated Transformer and two LEDs for Status
indication)
– EtherCAT port 0 (Input)
(8 pin RJ45, X900, with integrated Transformer and two LEDs for Status
indication) - EtherCAT port 1 (Output)
(AirMax VS®, 10052825-101LF, High Speed/Modular Connectors, R/A
HDR 72POS, PRESS-FIT Type A Peripheral Slot)
- CompactPCI Serial PC
(AirMax VS®, 10052837-101LF, High Speed/Modular Connectors, R/A
HDR 96POS, PRESS-FIT, Type A Peripheral Slot)
- 36 single ended 3,3V FPGA I/O lines including latch and sync signals
from Beckhoff EtherCAT IP core
Only for test- and programming purposes:
JTAG
(5-pin JTAG pin header, X1300) - JTAG Debugging (Boundary Scan /
Signal Tap / First time initialisation)
Temperature
range
Operation:
0...65 °C ambient temperature, passive cooling
Storage:
-25...70 °C
Transport:
-25...70 °C
Humidity
max. 90%, non-condensing
Protection class IP20 in mounted position
Dimensions
PCB:
160 mm x 100 mm x 20 mm
according to CPCI-S0 R1.0 Specification)
Front panel: 3U/4HP compliant to IEEE 1101
Weight
Ca. 160 g
Table 4:
General data of the module