![ESD CAN-CBX-CPU5201 Hardware Manual Download Page 50](http://html1.mh-extra.com/html/esd/can-cbx-cpu5201/can-cbx-cpu5201_hardware-manual_2426381050.webp)
Appendix CAN-CBX-CPU5201-PLC
Note:
The CAN-CBX-CPU5201-PLC starts up on LAN as UPnP device. Thus it can be
localized e.g. via the windows network environment, if this service is enabled.
7.2.2 Configuration of the IP-Address with CODESYS
The CAN-CBX-CPU5201-PLC comes with a CODESYS 2.3 runtime environment. The required
CODESYS
®
target files and libraries are contained in the scope of delivery of the CAN-CBX-
CPU5201-PLC.
Configure the IP-address of the CAN-CBX-CPU5201-PLC (see above) in the target settings of the
CODESYS programming environment.
7.2.3 Indication of the CAN-CBX-CPU5201-PLC LEDs
The position of the LEDs is described in Figure 4 on page 11.
LED
Name
Function
C
CAN Activity
LED led lights up in case of correct function of the CODESYS runtime
environment
P
Error
Not used; off
D
User-specific
Blinking during software update processes, otherwise off
S
CPU Status
On after correct start of the CAN-CBX-CPU5201-PLC. The LED lights
up approximately 30 seconds after switching on.
Table 13: LED Display
Page 50 of 53
Hardware Manual • Doc. No.: C.3071.21 / Rev. 1.5
CAN-CBX-CPU5201