93
Appendix A
Specifications
A-1 Introduction
Appendix A describes the complete specifications of this meter.
A-2 Technical Specifications
Specifications assumptions:
•
One-year calibration cycle.
•
Operating temperature at 18
°
C to 28
°
C (64.4
°
F to 82.4
°
F).
•
Accuracy is expressed as:
±
(% of r digits) after 30 minutes warm-up.
•
Temperature coefficient: Add
±
[0.15 x (the applicable accuracy)/
°
C] for 0
°
C
to 18
°
C and 28
°
C to 50
°
C.
•
Relative Humidity (RH): up to 80% (60% for 50M
Ω
range of resistance
measurement).
•
All specifications are specified under single display mode in operation only.
Display Counts and Reading Rates
Full Scale Display Counts: 51,000 Counts
Reading Rate (Approx.)
Measuring Function
Readings/Sec
Measuring Function
Readings/Sec
DCV
3
DCV / Frequency
1.3/2
DCA
3
ACV / Frequency
3/2
Diode
3
ACV+DCV / Frequency
1.3/2
ACV 3
DCA
/
ACA
1.3
ACA
3
ACA+DCA / DCA
1.3
Ω
3 ACA+DCA
/
ACA
1.3
Frequency/ACV or ACA
2/3
DCA / Frequency
1.3/2
ACV+DCV
1.3
ACA / Frequency
3/2
ACA+DCA
1.3
ACA+DCA / Frequency
1.3/2
DCV / ACV
1.3
dBm / DCV
3
ACV+DCV / DCV
1.3
dBm / ACV
3
ACV+DCV / ACV
1.3
dBm / ACV+DCV
1.3
Notes:
1.
The reading rate is measured as above combinations and applications at lock range.
2.
Using RS-232 or GPIB remote interface, the reading rate is similar to normal mode
.
