88
Command
Parameter
Std/New
Explanation
CALCulate
Std
Set the calculation function.
:DBM
New
Set dBm reference impedance
:IMPedance
<reference> New
[:STAT]
<Boolean> New
:LIMit
Std
Set and query the comparator.
:FAIL?
Std
:LOWer[:DATA]
<number value>
Std
[:STAT]
<Boolean> New
:UPPer[:DATA]
<number value>
Std
:RECord
New
Set the dynamic recording mode.
:MAXimum
New
:MINimum
New
:MINMAX
New
:OFF
New
Turn off recording mode
:RELative
New
[:STAT]
<Boolean> New
:PERcentage
New
[:STAT]
<Boolean> New
:MODE?
New
Query the calculation function.
INITiate[IMMediate]
Std
Reset meter without changing setup
:CONTinuous
<Boolean> Std
Set the meter at free run or data hold operation
mode.
:CONTinuous?
New
Query the operation mode.
TRIGger
Std
Trigger function
:SOURce
<BUS|IMM>
Std
Select a trigger source.
:SOURce?
Std
Query the trigger source type.
MEASure?
Std
Trigger and get measuring value.
READ?
[[,@1]|,@2]
Std
Read the display value.
READ??
New
Read the both display values.
SYSTem
Std
Subsystem
:ERRor?
Std
Read the error message.
:VERSion?
Std
Return the firmware version.
Note:
“Std” commands
means defined in SCPI standard and “New” commands are not
defined.