78
*OPC?
Description:
This command pauses program execution until all operations are completed.
Response:
Return
‘
1
’
after all pending-operations have been completed.
*RST
Description:
Place the meter to power-on-reset state, but no affect following items:
1.
The Service Request Enable or the Standard Event Status Enable.
2.
The Output Queue and interface parameter.
Note:
This command will be executed for 5 seconds at least. Be sure to execute
other commands then.
*SRE <NRf>
Description:
S
et the Service Request Enable Register bits.
Parameter:
<NRf> (0 to 255). The bit 6 of value and unused bits are ignored when set the
register.
Example: *SRE
48
Enable bits 4 (MAV) and 5 (ESB) in the S
ervice Request Enable
register.
*
SRE?
Description:
Query the
Service Request Enable Query Register.
Response:
(Integer) Decimal equivalent of the register byte. Return value is 0 to 255.
*STB?
Description:
Query the
Status Byte Register.
Response:
(Integer) Decimal equivalent of the register byte.
Example: *STB?
Return:
‘
96
’
if bit 5 (ESB) and 6 (MSS) is set (1) and the rest of bits are
reset (0).
*WAI
Description:
Command required by IEEE 488.2 standard, but non operate on this meter.
