ESCO Technologies ETS-Lindgren HI-6006, User Manual

Page: 49 / 140

ets-lindgren.com Battery-Operated Field Probes 49
6.0 Battery-Operated Field Probes
Note: Before using your battery-operated probe, read the following:

HI-6023 and HI-6006 Field Probe: Appendix C:
Series H-491198-48 Battery Charger on page 81.

HI-6053 Field Probe: Appendix B: Series H-491198-01 Battery
Charger on page 73.
Note: To calibrate the probe prior to shipment, ETS-Lindgren also
charges the internal battery at the factory. Every effort is made to
make sure that the probe arrives ready to use, but you should verify
the condition of the battery prior to making any measurements.
The HI-60XX Series Field Probe is a battery-operated probe that utilizes
three orthogonal sensors to provide an isotropic reading of the electric field.
When requested, X, Y, Z, and total field data can be reported, making the
HI-60XX Series true 3-axis probes.
The HI-60XX Series uses either the HI-4413P Fiber Optic Modem or the
HI-4413USB Fiber Optic to USB Converter to communicate with ProbeView
II™
software through a port on the computer. The HI-6100 Field Monitor may also be
used with the HI-60XX Series. For more information on readout options, see
page 11.
Note: For a list and description of communication and information
transfer protocols, including command structure and probe
commands, see Appendix D: Operating Protocols on page 89.