background image

Power

 to electrical outlet

IR In

 for IR external 

control

Ethernet Network Jack 

connects FireBall to your 

broadband Ethernet 

network.

RS-232

 for external 

control or touch screen

Analog Out 

to the 

receiver for analog audio

Analog In 

from external 

analog audio source

Optical Out

 to the 

receiver for digital audio

Component Video Out 

to the

 Telly 

or other

 

display device

Composite 

or

 S-Video 

Video Out 

to the

 Telly 

or 

other

 display device

Quick Setup

6640 Intech Blvd.

Indianapolis, Indiana 46278, USA

www.escient.com

Email: [email protected]

Document Number: M32003-01A2

March 2007

1. UNPACK YOUR NEW FIREBALL™ SEi

• Unpack the FireBall, cables, and accessories (save the box).
• Make note of the serial number (located on the back).
 
  SERIAL NUMBER: _________________________________________

2. CONNECT FIREBALL TO YOUR A/V SYSTEM

• Locate the included composite video and analog audio cables.
• Connect FireBall to any available A/V input on your receiver or Telly.

Note:

 You may use optional s-video or component video cables and optional digital audio cables 

for the best picture and sound quality

Note:

 The default video output mode is NTSC. Instructions for changing the video mode to PAL 

are in the User's Guide.

3. CONNECT FIREBALL TO THE INTERNET

FireBall requires an Internet connection to identify the CDs played and recorded in the front panel 
drive, for playing Internet Radio stations, and for general system maintenance.

• Connect the included ethernet cable from
  FireBall's ethernet jack to your ethernet
  network.

NOTE: You may need to purchase 

additional network hardware such as a 

"router". Please contact your Escient dealer 

for more information.

4. POWER UP!

• Plug FireBall into an AC outlet.
• The Standby LED on the front of the FireBall will begin to flash RED during the power on cycle.
  When the LED turns solid RED, the FireBall is ready for use.
• Press the power button on the front panel or on the remote control.
  The LED will turn solid BLUE and video will be displayed on the Telly when the unit is on. 

Note:

 You may have to press the "FB1" button on the remote to configure it to control FireBall. 

Also be sure the Telly and receiver are turned on and set to the correct FireBall input.

5. QUICK START

•  Use the remote control and follow the on-screen instructions.

©2007 Escient. All rights reserved. Escient and the Escient logo are 

registered trademarks and FireBall and Physital are trademarks of Digital 

Networks North America, Inc. All other trademarks are property of their 

respective owners. Escient reserves the right to change product hardware, 

features and software without notice. Upon any change, materials are 

updated as quickly as possible, but may not be reflected in documents 

already distributed. Supported hardware is updated continually. If you wish to 

interface with hardware that is not listed on this data sheet, please call Escient 

at 800.372.4368.

Reviews: