Esaote 350009500, Getting Started, Page: 49 / 114

MyLab
- G E T T I N G S T A R T E D
4 - 9
GETTI
NG STARTED
Its color indicates the status of the battery: when the led is lighted, at least one
battery is being charged.
The best method for charging the battery is to connect the system to the power
mains while keeping it switched off. In these conditions the charging cycle lasts
around two hours and fifty minutes (2h50min).
During the charging procedure the battery led is orange: the procedure is
completed when the battery led switches off.
A system which has not been used for a month needs to be charged before using
it with the battery.
CAUTION
Charge and discharge the battery only when the environment temperature
is between 15°C and 30°C.
Whenever the battery pack has been removed from the system, perform one
full charging procedure before switching on the unit.
The battery pack is not charged when overheating.
When the battery reaches the maximum temperature threshold for its working
condition, a red cross is displayed over the battery icon.
When this occurs, disconnect the power cable and wait for about two (2) hours
before connecting the power cable again, so that the battery cools down.
Blinking of the battery led When the battery can’t be charged, the led starts blinking.
First Use
A new battery pack might be partially discharged: before using it for the first time,
perform one full charging procedure.