Chapter 3: DS850 User Interface
28
EVS5200_DOC_SOP_DS850
Antivirus
User Access
When an election definition is loaded into the scanner, the firmware on the DS850 sets
the User Access feature to enabled. When User Access is enabled, a user can lock the
scanner. When the scanner is locked, no function can be performed from the touch
screen, such as modifying configuration settings or scanning ballots, until the Election
Code is entered and the scanner is unlocked. Once an election definition has been
loaded, you can disable the User Access feature from the User Access screen, if you
wish to do so. When User Access is disabled, the scanner cannot be locked.
If an election definition has been loaded, the User Access setting determines the screen
that is displayed when the scanner is started. If an election definition has been loaded
and User Access is enabled, the Startup screen is displayed when the scanner is started.
If an election definition has been loaded and User Access is disabled, the Scan Ballots
screen is displayed when the scanner is started. (If an election definition has not been
loaded, the Setup screen is displayed when the scanner is started.)
Note:
This section refers to future functionality that is not currently available on the DS850.
Reference:
for the steps that must be followed to lock the scanner.
Reference:
