manualshive.com logo in svg

ES&S DS850, Operator'S Manual

Share
Download
ES&S DS850 Operator'S Manual Download Page 140

 Chapter 8: Reports

134

EVS5200_DOC_SOP_DS850

 Software Version 2.10

 Published: February 26, 2014

Ballot Style Counts Report

The Ballot Style Counts Report provides the count of each ballot style (sequence, type, 
and split) within a precinct. The options for this report are:

Precinct

 - The report provides the count of each ballot style within a precinct 

organized by precinct.

Ballot Style

- The report provides the count of each ballot style within a precinct 

organized by ballot style.

The following is an example of 
the screen that is displayed 
when the Ballot Style Counts 
Report is selected from the 
Reports menu.

Follow the steps below to 
preview or print the Ballot Style Counts Report:

1.

From the Reports menu, press 

Ballot Style Counts Report 

in the 

Report Type

 field.

2.

Select the desired report option by pressing on the option button to the left of it in 
the 

Organized By 

field.

3.

Press 

Preview

 to the view the report on the touch screen, or press 

Print

 to print the 

report on the laser printer.

Summary of Contents for DS850








































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands