manualshive.com logo in svg

ES&S DS850, Operator'S Manual

Share
Download
ES&S DS850 Operator'S Manual Download Page 130

 Chapter 8: Reports

124

EVS5200_DOC_SOP_DS850

 Software Version 2.10

 Published: February 26, 2014

Zero Report

Use the Zero Report to ensure all of your contests have zero votes before you begin 
scanning ballots. The report displays zeros for all contests, indicating that no ballots 
have been scanned. You cannot print this report after ballots have been scanned on the 
DS850.

The following is an example of the screen that is displayed when the Zero Report is 
selected from the Reports menu.

Follow the steps below to preview or print the Zero Report:

1.

From the Reports menu, press 

Zero Report

 in the 

Report Type

 field.

2.

Press 

Preview

 to the view the report on the touch screen, or press 

Print

 to print the 

report on the laser printer.

Summary of Contents for DS850








































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands