5 OPERATION
0463 730 001
- 19 -
© ESAB AB 2021
5
OPERATION
5.1
Overview
General safety regulations for handling the equipment can be found in the chapter
"Safety." Read it before you start using the equipment.
5.2
Connections and control devices
1.
Mains power supply switch, I/O
9.
Connection for remote control unit
2.
Knob for selecting electrode type
10.
Lug connection (-): MIG/MAG: Return
cable TiG: Welding torch MMA: Welding
cable or return cable Gouging: Return
cable
3.
Knob for inductance (MIG/MAG) and
arc force (MMA)
11.
Lug connection (+): MIG/MAG: Welding
cable TiG: return cable MMA: Welding
cable or return cable Gouging: Welding
torch
4.
Display, current (A) and voltage (V)
12.
Voltage selector switch
5.
Knob for setting: SMAW/GTAW: current
(A) and Gouging: voltage (V)
13.
Power socket for grinding machine,
CO
2
heater, lighting (115 VAC)
6.
Process selection knob (SMAW,
GMAW, GTAW, Mobile feed, Gouging)
14.
Circuit breaker, 20 A, 115 VAC
7.
Circuit breaker, 10 A, 42 V
15.
Connection for cooler power supply
8.
Connection for wire feed unit
16.
Connection for mains power supply
NOTE!
Welding terminals, positive (+) and negative (-), are lug type connectors and adapter
cables are required to connect lug to OKC for 70 mm
2
and 95 mm
2
cables.
