ESAB CIGWELD EasyWeld 130, Operating Manual, Page: 21 / 66

EasyWeld / HandyWeld 130
0-5618 2-7 INTRODUCTION
2.11 Optional Accessories
We recommend genuine CIGWELD products.
The biggest range and best quality with guaranteed performance.
Part Number Description
W6000600 Gas Nozzle
OTW11/23/R Contact Tip 0.6mm
OTW11/30/R Contact Tip 0.8mm
OTW11/35/R Contact Tip 0.9mm
OTW11/40/R Contact Tip 1.0mm
OTW11/45/R Contact Tip 1.2mm
W6000605 Gas Diffuser
(suits CMG13DL)
W4012302 MIG Front-End Kit Box BZL-14 LH
W52BR13D3 CMG13DL MIG Gun 3m
W4012904 Feed Roll 0.8-0.9mm U-Groove (soft wires)
W4012905 Feed Roll 0.6-0.8mm V-Groove (hard wires) included with the machine
W4012906 Feed Roll 0.8-0.9mm V-Groove (hard wires)
W4012907 Feed Roll 0.8-0.9mm V Groove Knurled (flux cored) supplied and fitted on the machine
W4013010
Argon Mini- Regulator and Gas Hose Kit includes CutSkill Regulator/Flowmeter Side Inlet,
Gas Hose 2m and Hose Clamp
210254 WeldSkill Argon Regulator / Flowmeter, 55LPM, 2 Gauge
201030 CutSkill Preset Argon Regulator / Flowmeter Vertical Inlet
201031 CutSkill Preset Argon Regulator / Flowmeter Side Inlet
CWPLIER
MIG Pliers
8-Function, Cut Wire, Clean Nozzle, Remove Hot Nozzle, Pick up & hold hot welding jobs/pieces, Remove Contact
Tip, Cut/Trim Spring Steel Liner, Long Nose Pliers, Mini Hammers to tap out spatter in the nozzle.
W4011501 WeldSkill Welding Equipment Trolley
Table 2-2
# Note that replacement Conduit Liners are not available for the EasyWeld 130 and HandyWeld 130 MIG Gun CMG13DL.