ESAB Aristo Mig 4000iw, Instruction Manual

Page: 7 / 28

2 INTRODUCTION
0459 419 401 - 7 - © ESAB AB 2017
2 INTRODUCTION
The Mig U4000i / 4000iw are MIG/MAG / TIG welding power sources, which can also be used
for MMA welding.
The power source is intended for use with the Feed 3004 or Feed 4804 wire feed units.
All the settings are made from the wire feed unit or control box.
ESAB's accessories for the product can be found in chapter "ACCESSORIES".
2.1 Equipment
The power source is supplied complete with terminating resistor, 5 m return cable and
instruction manual.