6
1.4
Connectors
Refer to the diagrams below for the positions of the reset button and various
connectors of the camera. Definition of the reset button and the connectors are
given as follow.
No.
Connector
Definition
1
Power
Connector
(DC12V)
DC12V power connection
2
Console Connector
This connector is used to burn firmware into
the camera when the camera is returned for
repair/maintenance.
Please
contact
the
camera manufacturer for further information.
3
RJ-45 Port
For network and PoE+ connections
4
Power Connector
(AC24V)
AC24V power connection
5
BNC
For analog video output
6
Audio/Alarm I/O
& RS-485 Connector*
Audio/Alarm I/O & RS-485 connection
7
Reset Button
Press the button with a proper tool for at least
20 seconds to restore the system.
8
SD Card Slot
Open the dome cover to reveal the SD Card
Slot. Insert the SD card into the card slot to
store videos and snapshots. Do not remove
the SD card when the camera is powered on.
*
Do
NOT
connect external power supply to the alarm I/O connector of the camera.
NOTE:
It is not recommended to record with the SD card for 24/7
continuously, as it may not be able to support long term continuous data
read/write. Please contact the manufacturer of the SD card for information
regarding the reliability and the life expectancy.
