ERNITEC EDNS V3000 Series, User Manual

Page: 92 / 124

91
Ernitec EDNS V3000 series – user manual
www.ernitec.com
V 2.2.082012
5. Remote Monitoring Software
The remote monitoring software is a remote browser-based
software application designed to operate with the DVR products.
Using the software, users are allowed to view live and recorded
video, and configure the DVRs remotely via a LAN, WAN or
Internet on a personal computer.
The connected PC will automatically download the remote
monitoring software plug-ins from the DVR when the DVR is
connected by entering its IP address in the address bar on the
browser.
Due to the setting items are similar to those listed in the DVR
’s
OSD setup menu, please refer to the sections above for setting
configuration of the remote monitoring software.
The tasks can be performed with the remote monitoring software
are listed below:

Remote viewing of live/ recorded video

Remote setup of the DVR

Remote control of dome cameras

Alarm notification from the DVR

Up to three connections to one DVR using the remote
monitoring software, including the preset
“admin” and two
other accounts
5.1 Remote Monitoring System
Requirements
Items Minimum Requirements
Personal
Computer
Minimum:
Intel® Pentium® M CPU 1.40GHz
RAM 512 MB
Recommended:
Intel® Core™2 Quad CPU Q6600 @
2.4GHZ
RAM 2 GB