ERNITEC EDNS V3000 Series, User Manual

Page: 91 / 124

90
Ernitec EDNS V3000 series – user manual
www.ernitec.com
V 2.2.082012
4.5.7 Run Dome Camera Tour
Users can also display dome camera tour setup at the dome
camera side. Follow the steps to run display of dome camera
tour.

Press a Channel key to view the corresponding camera in
full-screen.

Then press DOME to enter Dome Control mode. The dome
control panel will be displayed.

Click <Preset> on the dome control panel or press CH1 key
to access the Set/Go Preset function. A numeral keyboard will
be displayed.

Click on the <Run Tour> button to run display of dome
camera tour.

Press any Direction keys to end the display of dome camera
tour.
4.6 System Log Exportation
In the Configuration setup menu, select <System Log> and a list
of system logs will be displayed on the screen. Users can export
the system log as a data file to an external storage device.
Connect a USB storage device and press COPY to export the
system log file to the USB storage device. Note that in the mean
time, a digital signature file will also be exported.
Configuration
Load Factory Default
Import Config
Export Config
System Log
Operation Log
No
ENTER
ENTER
ENTER
Off
Also under the Configuration setup menu, set <Operation Log>
to <On> and operation logs will start to be recorded in the system
log. Alternatively, set to <Off> and operation logs will not be part
of the system log.