ERNITEC EDNS V3000 Series, User Manual

Page: 107 / 124

106
Ernitec EDNS V3000 series – user manual
www.ernitec.com
V 2.2.082012
5.3.3 Playback Video
The remote monitoring software allows users to view recorded
video either from the DVR, or from the hard disk drive of the PC
To access the Playback screen, click <Play> button on the main
window toolbar. There are three tabs in the Playback screen:
<Remote Playback>, <Local Playback>, and <Verify> tabs.
<Remote Playback> allows users to play back from the DVR.
<Local Playback> enables users to playback a recorded video
file stored on the hard disk drive of the PC. <Verify> is provided
for users to authenticate if the exported video is altered.
The DVR continues recording while playing back recorded video
on the PC, either remote playback or local playback.
5.3.3.1 Playback Remote Video
To view remote video, click <Play> on the main window toolbar,
and then <Remote Playback> tab. The <Remote Playback>
screen will be displayed.
The <From> and <To> in the <Available Record Video> display
the date and time from which recorded video is available for
playback.
To playback remote video segments, follow these steps:

Choose <Playback> in <Select> field for playback recorded
video.

In <Start> field, users can change the date and time either by
typing desired numbers directly or using the arrow buttons.
To type directly:
Click on day, month and year of date field respectively, and
type the desired numbers directly. Follow above steps to
adjust the hour, minute and second of time field.
To use the arrow buttons:
Click on the arrow button next to the date field to display the