Network Video Recorder Quick Start Guide
23
If you install 4 or more HDDs, a hot spare disk for array rebuilding will be created.
Step 4
A message box will pop up when the array creation is completed, click OK on it.
Step 5
Optionally, the device will automatically initialize the created array. Go to Storage > RAID
Setup > Array view the information of created arrray.
3.10 Recording Settings
Before you start:
Make sure that the disk has already been installed or added. If not, please install or add a disk and
initialize it. You may refer to the user manual for detailed information.
Option 1:
In the live view mode, select a connected camera window and click
at the toolbar to start
recording.
Option 2:
Step 1
Go to Storage > Recording Schedule.
Step 2
Select a camera.
Step 3
Check the Enable Schedule.
Step 4
Select a Record Type. The record type can be Continuous, Motion Detection, Alarm, Motion |
Alarm, Motion & Alarm, Event, etc.
