Use and maintenance manual
Longitudinal profile welding
Model: LRWG-100
_______________________________________________________________________________________________________________________
P a g . 5
components and static components under high temperature, due to which, during design
and construction of its equipment, ERM Engineering. has aimed to reduce and minimise
those risks by including protection devices and safety systems based on the European
Community Council Directives.
-
Installation and start-up
:
Site the machine in well ventilated places or under a fume exhaust hood.
THE FUMES PRODUCED WHEN WELDING SOME MATERIALS ARE TOXIC AND MAY
CAUSE IRRITATION OF THE RESPIRATORY TRACT.
Place the welder in such a way to simplify placement and removal of continuous belts on the
open side of the machine frame.
Allow sufficient free space for movement of material.
It must also be connected to a compressed air supply through the input to the pressure regulator
located on the left-hand side of the machine. Adjust the input pressure to 6 bar:
Level the machine with four rubber feet:
