Use and maintenance manual
Sidewall and ropes welding machine
Model: LRBW-150
_______________________________________________________________________________________________________________________
P a g . 2 7
When Leister is ON you can adjust the temperature rotating this wheel and adjust the air caudal
pressing on time the wheel and rotating.
When both Leister are at temperature, turn both at the same time and press the green button to
start, immediately, fix the Leister with black knob.
We recommend adjusting the speed between 0-05 and 0-06 and temperature 340/380ºC.
Caudal between 20 and 30.
For operation with PU belts, we also recommend using the air-cooling nozzles, open the air
valve.
-
Care and maintenance
•
Because various chemical components are used during the welding process, there is an
accumulation of highly corrosive waste in the welding area (rollers, pulleys, guides, etc.)
and so they should be cleaned regularly to ensure correct operation.
•
Do not grease or lubricate any component of the machine, as these components are self-
lubricated, and the mixture of different lubricants could cause jamming or seizing.
