ERME T3P, Translation Of The Original Instructions

Page: 43 / 66

Erme AG Control/operation | 7
Table models professional 43 / 66
7.4.3 Packaging liquids
When packaging liquid packaged goods, it must be ensured that the vacuuming
process is stopped on time. Liquids foam under a vacuum. This effect is triggered by
the reduction of the atmospheric pressure in the vacuum chamber. Since the liquid
boils, there is a risk of the liquid leaking out of the bag. As a result, material is lost
and the vacuum chamber is contaminated.
When the "vapour detection" function is enabled (see chapter
General operation of
the controller CP-E3 [ } 46] ), the controller automatically detects the boiling point
of the liquid and switches a step further in the work cycle.
7.5 Switching on the machine
Proceed as follows to switch on the machine:
1 Switch on the mains switch of the machine.
2 Switch on the controller by pressing the "ON/OFF" button.
ð The values most recently set or the program most recently called up is shown
on the display.
7.6 Switching off the machine
Proceed as follows to switch off the machine:
1 Press and hold the "ON/OFF" button for 3 seconds.
2 The machine is switched into standby mode.
NOTE
After 5 minutes without any action, the machine automatically
switches into standby mode.
3 Switch off the mains switch of the machine.