ERL tesla lite User Manual Download Page 63

Page: 63 / 288

7 Recorder Setup Utilities

D03283R01.10

TESLA LITE User Manual

7-3

7.2 Communication Port Settings

The Communication settings control the modes and baud rates of the record-
er’s communication ports and defines the SCADA communication mode.

Figure 7.3: Recorder Setup Utilities - Communication Ports

Communication
Version

Read-only field that displays the version of the communications pro-
tocol used by the currently connected TESLA unit.

System Frequency

Read-only field that displays the assumed power system frequency of
the recorder. This is a factory setting.

Station

Station Name

User-defined, for your reference only.

Station Number

User-defined, for your reference only.

Location

User-defined, for your reference only.

Table 7.1: Unit Identification Settings

Summary of Contents for tesla lite

































































































































































































































































































Search results

Summary of Contents for tesla lite

Reviews:

ERL tesla lite, User Manual, Page: 63 / 288

Search results

Summary of Contents for tesla lite

Reviews: