ERL tesla lite, User Manual, Page: 36 / 288

4 Communicating with the Recorder
4-6 TESLA LITE User Manual D03283R01.10
4.5 USB Link
Figure 4.4: USB Link
To create an USB link between the recorder and the computer, first the USB
driver for the ERLPhase 4000 Series Device needs to be installed, as follows:
Unzip the file (can be obtained from ERL web site):
ERLPhase_USB_driver.zip
In this case we assume you unzipped to the Desktop
In Windows XP or Windows 7
Connect a USB port of the PC to Port 450 (USB front) of the TESLA
4000. The TESLA 4000 was already powered on.
In the window
“Welcome to the Found New Hardware Wizard”
“Can Windows connect to Windows Update to search for software?”
Check the option “No, not this time”
In the window
“This wizard helps you install software for:”
ERLPhase 4000 Series Device
“What do you want the wizard to do?”
Check the option “Install from a list or specific location (Advanced)”
In the window
“Please choose your search and installation options”
“Search for the best driver in these locations”
“Uncheck the option “Search removable media (floppy, CD-ROM.)”
Check the option “Include this location in the search”
Browse for the following folder:
Your PC must be appropriately configured for USB communication
(see “TESLA Control Panel Installation” on page 3-1).
Port 450 - USB
Laptop PC