manualshive.com logo in svg

ERL tesla lite, User Manual, Page: 205 / 288

Share
Download
ERL tesla lite User Manual Download Page 205

10 Graphing Records

D03283R01.10

TESLA LITE User Manual

10-71

10.8 Calculated Channels

Calculated channels are virtual channels derived from the original recorded 
channels. They are calculated based on the configuration information. In the 
TESLA LITE recorder, all the calculated channels are added to the original re-
cord only once, but are available any time to view with the RecordGraph ap-
plication. Calculated channels differ widely depending on the product. They 
are classified under high and low speed categories. 

High Speed Calculated channels

   •  Summation

   •  Positive sequence

   •  Negative sequence

   •  Zero sequence

   •  Watts (single and three phase)

Low Speed Calculated channels

   •  Summation

   •  Positive sequence

   •  Watts (single or three phase)

   •  Vars (single or three phase)

   •  Impedance

   •  External

Type and number of channels available for the view depends on the configura-
tion information. 

Choose 

Options>Calculate Derived Channels Now

 to add the calculated chan-

nels. If this option is disabled, then the calculated channels are already avail-
able.

Summary of Contents for tesla lite

































































































































































































































































































Reviews:

No comments