ERL tesla lite User Manual Download Page 201

Page: 201 / 288

10 Graphing Records

D03283R01.10

TESLA LITE User Manual

10-67

Fundamental
RMS

This option displays the rms measurement of the fundamental (60 or 50 Hz)
between the two markers (X and O) of the selected channel.

1. A trace (channel) must first exist on the graph. Click the graph that you want

to show absolute time measurement.

2. Select the

Measure>Markers

menu option or the

Markers

button on the tool

bar to place the markers on the graph. Markers are automatically placed if
not selected.

3. Select

Measure>Fundamental RMS

menu option.

4. Readout corresponding to the markers is displayed on the right-hand side of

the graph including:

   • RMS (fundamental frequency) Title
   • Minimum rms
   • Maximum rms
   • Average rms

Figure 10.93: Fundamental RMS

Fundamental RMS

Summary of Contents for tesla lite

































































































































































































































































































Search results

Summary of Contents for tesla lite

Reviews:

ERL tesla lite, User Manual, Page: 201 / 288

Search results

Summary of Contents for tesla lite

Reviews: