manualshive.com logo in svg

ERL tesla lite, User Manual, Page: 122 / 288

Share
Download
ERL tesla lite User Manual Download Page 122

8 Configuring the Recorder

8-44

TESLA LITE User Manual

 D03283R01.10

8.17 Trend Logging

Figure 8.24: Trend Log Configuration 

The TESLA LITE recorder can log periodic measurements over an extended 
period of time. Up to 45 values can be logged at intervals ranging from 10 sec-
onds to one hour. 

All recorder channels and calculated values are available for trending. Event 
messages can also be stored in the trend log, allowing them to be saved from 
the normal circular overwrite of the Event Log. 

The trend log accumulates data for up to 15 days. When it is full, it can either 
be set to automatically overwrite the oldest data or to stop logging. A “near 
full” alarm function is available. The accumulation settings are defined in the 
recorder’s Utilities menu (see “Recording Control Settings” on page 7-5).

To configure trend logging select either 

New Trend

 from the Config menu or 

New Trend

 from the right-click context menu in either the Channel Tree or El-

ement Tree. 

The 

Scan Interval

 determines the frequency of data logging. It can be set from 

10 seconds to 3,600 seconds (one hour).

Summary of Contents for tesla lite

































































































































































































































































































Reviews:

No comments