ERL tesla lite, User Manual, Page: 121 / 288

8 Configuring the Recorder
D03283R01.10 TESLA LITE User Manual 8-43
8.16 Meter Groups
Figure 8.23: Meter Group Configuration Screen
A Meter Group is a collection of measured and calculated values that are pre-
sented as a group by the Control Panel’s Metering function. Metering Groups
are referred to by a user-specified name, and the name of the Metering Group
appears on the tab in the Metering display.
There are two default metering groups and ten user-defined groups for a total
of twelve metering groups.
The Metering display has fixed displays for analog and external input chan-
nels. You may add additional displays containing any set of channels, orga-
nized as you wish.
1. To create a meter group, right-click on the Meter Groups entry in the Con-
figuration menu.
2. Select Add Meter Group . A New Meter Group line appears, and the New
Meter Group text is selected.
3. Type the Meter Group name, then Enter . The text you type replaces the New
Meter Group text.
4. In the meter group screen, you can place any defined channel in any cell. The
resultant meter group display will show the desired channels in the speci-
fied place on the screen.
Phase angle readings displayed in meter groups are based on the
configured Phase Angle Reference Channel “Phase Angle Refer-
ence Channel” on page 8-10.