6 Offliner Settings Software
D02706R02.30
L-PRO 4000 User Manual
6-7
2. Check the serial number and the settings version of the relay. The Device
Serial Number and Required Settings Version on the Identification screen
indicate the serial number and the settings version of the relay.
Creating a
Setting File
from an Older
Version
1. Offliner Settings displays a default setting file on start up showing the set-
tings version in the bottom status bar. As an example L-PRO Offliner is
shipped with a set of default sample files of older settings versions. These
sample files are “v1 sample.lps”, “v2 sample.lps”, “v3 sample.lps”, etc.
Each sample file contains default values of an older settings version. For a
new installation these sample files are placed in the default directory
C:\Program Files\ERLPhase\L-PRO Offliner Settings
, or the user can
choose the path during the Offliner software installation. If an older ver-
sion of L-PRO Offliner was previously installed on the PC, then the default
directory may be
C:\Program Files\APT\L-PRO Offliner Settings
. Open a
sample file of the desired version. Use
File/Save As
to save the sample file
to a new file name. Then edit the setting file and the serial number, save it
and load it into the relay.
Summary of Contents for L-PRO 4000
