Ericsson TANDBERG Television iPlex N20001, Installation Manual, Page: 59 / 98

iPlex Installation and Hardware Specification Guide
59
Installing Hardware
Before installing any TANDBERG Television part into the iPlex, visually inspect it
for damage that might have occurred during shipment. If you find any omissions
or damage, contact the supplier and the carrier that delivered the package.
NOTE
Regulatory statements and conditions for this product are in the
front of this user guide.
CAUTION
Use of non-TANDBERG-Television parts will void the warranty.
ANTI-STATIC CAUTION
•
A TANDBERG Television part is packaged in an anti-static bag for protection. Keep
the part in its anti-static bag until you are ready for installation.
•
You must be static-free to install TANDBERG Television parts or you may cause
irreversible damage to the unit. Properly ground yourself using a grounding wrist-
strap.
•
Handle a module or submodule by its edges.
•
Do not touch any components inside the iPlex chassis.
•
Plug your grounding wrist-strap into the ground outlet on the chassis when installing
anything directly into the iPlex.
INSTALLATION WARNING
•
Do not install or apply power to a damaged part.
•
Only use insulated or nonconductive tools, when possible.