Ericsson T39 At Command Reference Download Page 21

Page: 21 / 224

AT Commands Phone Terminal Terminated

4 AT Commands Phone Terminal
Terminated

4.1.1 Commands

Attention Command

AT*

List All Supported AT Commands

AT+CLAC

List All Available AT Commands

4.1 Ensemble C2: Control and Identification

Description:

Checks the communication between the phone and any accessory. Determines the
presence of a phone.

Execution command:

Description:

Lists one or more lines of AT commands supported by the phone.

Execution command:

AT*

Response:

<CR><LF>

[<AT Command2>

<CR><LF>

[...]]

Description

AT...

Defines the AT command, including the prefix AT

Example:

AT*

AT+CGMI

AT+CGMM

AT+CGMR

...

Description:

Execution command causes the ME to return one or more lines of AT Commands.

Note

: This command only returns the AT commands available to the user.

Execution command:

AT+CLAC

Test command:

AT+CLAC=?

Shows if the command is supported.

Possible execution
command response(s):

<CR><LF>

[<AT Command2>

<CR><LF>

[...]]

+CME Error: <err>

Summary of Contents for T39

































































































































































































































Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands

Ericsson T39, At Command Reference

Search results

Summary of Contents for T39

Reviews:

Related manuals for T39

Brands by name

Popular brands