Ericsson T28z User Manual Download Page 94

Page: 94 / 128

Accessories

To answer a second call

•

Press the button on your Portable Handsfree once to answer the waiting call.

The current call is now put on hold.

When you press the button on your Portable Handsfree again, the second

call is disconnected and the first call is retrieved automatically.

To voice dial using the Portable Handsfree

Press and hold the button on your Portable Handsfree until you hear a tone.

Release the button and say a name (voice label) that you have recorded

previously.

The name is played back to you and the call is connected.

Note!

Before you can use voice dialing, you need to record voice labels for

entries in your phone book. See “Preparing your Phone for Voice Dialing” on

page 76.

For best performance when voice dialing and voice answering with a

Portable Handsfree unit, we recommend recording your voice labels when

connected to a Portable Handsfree unit.

When you connect an Ericsson Advanced Vehicle Handsfree to the T28z, the

In Car profile is set automatically. This means that all profile settings are set

to the values specified for the In car profile.

See “The Profile Concept” on page 87.

Placing the Phone in the Vehicle Handsfree

Vehicle Handsfree

Place the phone in the
holder as shown and press
backwards to attach it.

Press the button on top
of the holder to release
the phone.

Summary of Contents for T28z

































































































































Search results

Summary of Contents for T28z

Reviews:

Related manuals for T28z

Brands by name

Popular brands

Ericsson T28z, User Manual

Search results

Summary of Contents for T28z

Reviews:

Related manuals for T28z

Brands by name

Popular brands