Ericsson T28z User Manual Download

Page: 10 / 128

Turning Your Phone On and Off

Turning Your Phone On
and Off

Open the flip by pressing the flip release button on the right side of
the phone.

Press and hold the

N O

key until you hear a tone.

If “PIN:” Appears in the Display

Some SIM cards are protected with a PIN code. If

PIN:

appears in the display

after you have turned on the phone:

Enter your PIN. If you make a mistake while entering your PIN, delete the

wrong number by pressing the

key.

Press

Y E S

Note!

If your PIN is entered incorrectly three times in a row, the SIM card is

blocked. You can unblock it by using your PUK. See “The SIM Card Lock” on

page 58.

Phone locked

appears in the display, enter your phone lock code. See “The

Phone Lock” on page 59.

Network Search

After you have turned on the phone (and entered your PIN), the phone

searches for a network.

When a network is found, the phone beeps three times. The indicator light on

top of the phone flashes green once every second and your network operator’s

name (in most cases abbreviated) appears in the display.

This is called standby mode. You can now make and receive calls.

Note!

See “Error Messages” on page 104, if you do not reach standby.

The first time you turn on your phone, you may want to choose the ring signal

type and set the clock and date. For more information about these and other

Turning your Phone on

Initial Settings

Summary of Contents for T28z

































































































































Search results

Summary of Contents for T28z

Reviews:

Related manuals for T28z

Brands by name

Popular brands

Ericsson T28z, User Manual

Search results

Summary of Contents for T28z

Reviews:

Related manuals for T28z

Brands by name

Popular brands