Ericsson SVP 2000, Reference Manual, Page: 99 / 196

Decoder Web-based GUI Control
5.1 What this Chapter Describes
This chapter describes the functionality of the SVP 2000 Decoder GUI.
Caution!
The SVP 2000 unit needs to be stopped state before any settings can be changed.
5.2 Decoder Tabbed Pages
The following figures show the site map for the Decoder Web-based GUI. They are
arranged in two tiers. Those under the
Advanced Tab (second tier) are required for
setting up the unit, whereas those on the top (first tier) are concerned with live
operation.
SVP 2000 Decoder
DASH Input
Wind down
Messaging
Advanced
Alarm/Event Log
Device Status
Network
SDI Output Details
Export/Import
Generate Events
Apply changes
Apply changes
Generate Logs
Connect/Stop
Browse
License
Video Input
Confidence
Display
First Tier (Live Operation) Pages
Shut Down
Reboot
Clear History
Send
Second Tier (Set Up) Pages
Browse
Switch
Change SVP 2000
Mode
SDI Output
DASH Input Details
Subtitling
TS Output
MPEG-DASH To MPEG-TS mode
TS Multiplexing
Video Profiles
MPEG-DASH To TS mode
Audio Profiles
MPEG-DASH To SDI mode
MPEG-DASH To SDI mode
Figure 5.1 Map of Decoder Tabbed Pages [MPEG-DASH Input Example)
EN/LZT 790 0046/1 R1A 5-5