manualshive.com logo in svg

Ericsson SVP 2000, Reference Manual, Page: 39 / 196

Share
Download
Ericsson SVP 2000 Reference Manual Download Page 39

Getting Started

 

3.2.3 

Powering Down 

To power down the SVP 2000, operate the switch behind the front panel.  

The SVP 2000 can also be powered down through the GUI. 

3.3 

Configuration Order for a New Unit 

1.  Connect a control PC to adaptor 0 or 1. 

2.  Connect the power cable to the unit. 

3.  Power up the unit. 

4.  Using a web browser on the control PC, go to the connected adaptor’s IP 

address. 

5.  Load the license for the unit 

6.  Update the IP addresses for Adaptor 0 and Adaptor 1 

7.  Connect Adaptor 0 and Adaptor 1 to the control and data networks as required. 

8.  Connect the baseband signal cables to/from the unit as required. 

9.  Configure the unit (as per the Reference Guide). 

10. Start the Encode or Decode process. 

 

 

EN/LZT 790 0046/1 R1A

 

 

 

 

3-5

 

Summary of Contents for SVP 2000





































































































































































































Reviews:

No comments