Ericsson RX1290, Reference Manual

Page: 53 / 176

Operating the Equipment Locally
Step Action Result
3 Scroll to Menu 3.1.7 and edit
the video test pattern to be
displayed. Press
Save .
Edits the video test pattern to be displayed.
4 Scroll to Menu 3.1.10 and edit
the parameter for framesync
enable (ENABLED or
DISABLED). Press
Save .
Edits the parameter for framesync enable.
5
Scroll to Menu 3.1.10.1 and
edit the PAL framesync offset
range (-199999 to +199999
pixels) and the NTSC
framesync offset range (-
199999 to +199999 pixels).
Press
Save .
Edits the PAL framesync offset range and the
NTSC framesync offset range.
6 Scroll to Menu 3.1.14 and
Menu 3.1.15 edit the
embedded audio group
(NONE, ONE, TWO, THREE
or FOUR). Press
Save .
Edits the embedded audio data IDs and audio
channel.
3.7.3 Setting Down Conversion Mode
This menu allows the user to set the receiver to produce a down converted SD
version of the incoming HD video source.
Note: The RX1290 provides ‘grade 2’ down conversion video quality. The
suitability of grade 2 video for broadcast will depend on the intended
application.
Table 3.12 Setting Down Conversion
Step Action Result
1 Scroll to Menu 3.1.8 and edit
the parameter for down
conversion enable
(ANAMORPHIC, CROPPED,
LETTERBOX or DISABLED).
Press
Save .
Edits the parameter for down conversion enable
and the output format.
3.7.4 Setting SD Monitor Aspect Ratio
This menu allows the user to set the SD output aspect ratio.
Note: This function only applies to 4:2:0 video, and has no effect on the down
converted SD output
EN/LZT 790 0003/2 R1A 3-15