Phone
67
To make a new call and switch between the new call and the
conference:
1.
Tap the conference and select
Hold call
from the pop-up menu
to
put the conference on hold.
2.
Enter the number of the person you want to call and tap
.
The split screen displays the active call
on the top screen and
the conference call
on the lower screen.
3.
Tap the number of the new call and select
Hold call
from the pop-up
menu. The new call is put on hold and the conference is made
active.
or
Tap the conference and from the pop-up menu select
Retrieve
. The
conference is made active and the new call is put on hold.
To end the new call and return to the conference:
•
Tap the number of the new call and select
Release
from the pop-up
menu. The new call ends.
To terminate a conference:
•
Select the conference by tapping the display anywhere in the
surrounding area of the individual members (not the members)
and select
Release
from the pop-up menu. The conference ends.
Office handsfree mode
Office handsfree mode can only be started during an active call.
Warning!
Office handsfree mode is a volume level above the
maximum phone volume and should not be used within an arm’s
length of your ears. See “Safe and Efficient Use” on page 205 for
more information.
To start the office handsfree mode:
1.
Make sure the R380e is away from your ear, at arm’s length.
2.
In quick succession, slide the volume slider upwards twice to start
the office handsfree mode. Two short beeps indicate that the
handsfree mode is activating.
To stop the office handsfree mode:
Slide the volume slider downwards to stop office handsfree mode.
Note:
Office handsfree is automatically deactivated after a call.
Summary of Contents for R380E
