Ericsson R380E, User Manual

Page: 13 / 228

Getting Started 13
Entering a Personal Identification Number (PIN)
Some SIM cards are protected with a PIN code.
If
Enter PIN:
appears in the display after you have turned on the
R380e:
1.
Enter your PIN code. If you make a mistake while entering your
PIN, erase the incorrect entry by pressing
clear. The code
you enter appears as asterisks (*) in the display, unless 1 or 9 is
entered as the first digit, i.e. calling an emergency number.
2.
Press
YES
.
On finding a network, the name given by your network operator or
a supporting associate operator network appears in the display.
Note: If your PIN is entered incorrectly three times in a row, the SIM
card is blocked. You can unblock it by using your PIN Unblocking
code (PUK). See “Security” on page 22 for more information.
Note: If
Enter code
appears in the ‘Phone locked’ message display,
enter your phone lock code. See “Security” on page 22 for more
information.
Turning on your R380e for the first time
After turning on your R380e for the first time, you are asked to select
your preferred language.
To select a language:
1.
Scroll with to find and highlight your choice.
2.
Press to confirm your selection.
3.
Turn your R380e off and then on again to activate the language.
With the flip closed there are a number of modes relating to different
circumstances. They are outlined as follows:
Standby mode
After you have turned on the R380e (and entered your PIN code), the
R380e searches for a network.
When a network is found, the R380e beeps three times. The indicator
light on top of the R380e flashes green once every second and your
network operator’s name (in most cases abbreviated) appears in the
display.
Flip closed
SIM card locked
****
Enter PIN:
NETWORK
18-05-2000
12:00