59
R290 User’s Guide
To Delete a Message
1. Press
SOFT LEFT
,
3
to enter Messages menu.
2. Press
2
to show the Originate menu.
3. Press
3
, to display the first three lines of the first message that you
stored in memory.
4. Use the
<*
and
#>
keys to scroll through the other messages stored in
memory. You can use the
SOFT
keys to scroll through the current
message’s contents.
5. Press
YES
to select the one you wish to delete. ‘
Delete Message?
’ is
displayed.
6. Press
YES
to delete this message, and your phone will jump to the
top of the next message. If you delete all the messages, your phone
will display ‘
No Messages
’ and then return to the Originate menu.
To Reply to a Received Message
1. Press
SOFT LEFT
,
3
to enter Messages menu.
2. Press
2
to show the Originate menu.
3. Press
4
, to display the Received Messages.
4. Use the
SOFT
keys to choose a message and press
YES
to select it.
The first three lines of the message are displayed.
5. Use the
<*
and
#>
keys to scroll through the other messages and the
SOFT
keys to scroll through the message text.
6. You can edit the text if required and send the completed message as a
reply (remember to check the destination address and service centre
address before sending the message).
To Forward a Received Message to a Third Party
1. Press
SOFT LEFT
,
3
to enter Messages menu.
2. Press
2
to show the Originate menu.
3. Press
5
, to display the Received Messages.
4. Use the
SOFT
keys to choose a message and press
YES
to select it.
The first three lines of the message are displayed.
5. You can use the
<*
and
#>
keys to scroll through the other messages
and the
SOFT
keys to scroll through the message text.
6. Press
YES
and a copy of the message text is created. You then
modify the destination, service centre, validity period and type to the
copy if necessary and send the completed message to a third party.
To Set the Message Parameter Defaults
1. Press
SOFT LEFT
,
3
to enter Messages menu.
2. Press
2
to show the Originate menu.
3. Press
6
to display the Defaults Menu. The display will show:
4. Select an option or press
NO
to return to the Originate Message
Menu.
5. Enter values for the default destination address, service centre
address, validity period and message type. When each value is
entered to your satisfaction, press YES to set it as a default.
To Check on the Status of the Last Message Sent
At the Originate Message Menu, press
7
and the phone will return with
either ‘
No Messages Sent
’ or
‘Message Rejected’
, or after a short delay
the service centre will send a priority message containing a status report.
This feature is network dependent.
Summary of Contents for R290SAT
Page 11: ...3 R290 User s Guide The Phone ...
