3.
Insert the remaining charger units into the enclosure and insert
their respective AC power cord plugs into the receptacles of the AC
Outlet Strip (see Figure 2, view A).
NOTE
Perform the following steps (Steps 4 thru 6) to ensure that the charger
units function prior to installing the top retaining cover on the
enclosure.
4.
Place the enclosure into position where it will be used and connect
the AC power cord plug from the AC Outlet Strip to a 110 VAC
power source.
5.
Press the power switch on the AC Outlet Strip to the ON position.
6.
Insert a
Monogram
Series VHF or UHF radio unit into each of
the charger slots and verify that the corresponding indicators light.
7.
Install the top retaining cover and secure with two screws (see
Figure 2, view B). Ensure that no cabling is pinched or damaged
when the cover is secured.
8.
Install the four self-adhesive rubber feet to the bottom of the
enclosure.
View A
View B
Figure 2 - Assembly Instructions
Printed in U.S.A.
LBI-39037
Mobile Communications
Monogram
Series
DUAL RATE MULTI-
CHARGER (3-UNIT)
KIT MHMA5C
Installation Manual
