Ericsson Inc.
Private Radio Systems
Mountain View Road
Lynchburg, Virginia 24502
1-800-528-7711 (Outside USA, 804-528-7711)
Printed in U.S.A.
3.
Insert the remaining charger units into the enclosure and insert their
respective AC power cord plugs into the receptacles of the AC Outlet
Strip (see Figure 2, view A).
Perform the following steps (Steps 4 thru 6) to ensure
that the charger units function prior to installing the top
retaining cover on the enclosure.
NOTE
4.
Place the enclosure into position where it will be used and connect the
AC power cord plug from the AC Outlet Strip to a 110 VAC power
source.
5.
Press the power switch on the AC Outlet Strip to the ON position.
6.
Insert a
Monogram Series MPG 300 radio unit into each of the
charger slots and verify that the corresponding indicators light.
7.
Install the top retaining cover and secure with two screws (see Figure
2, view B). Ensure that no cabling is pinched or damaged when the
cover is secured.
8.
Install the four self-adhesive rubber feet to the bottom of the enclosure.
VIEW A
VIEW B
Figure 2 - Assembly Instructions
ericssonz
LBI-39009
Installation Manual
Monogram
Series
DUAL RATE
MULTI-CHARGER
(6-UNIT) KIT
MHCH3W
